Auxiliary Functions - Beko DTGC9100W User Manual

Operating the product
Programmes
Cotton cupboard dry*
Cotton Iron dry
Synthetic cupboard
dry
Power consumption of the off-mode for the standart cotton programme at full load, PO (W)
Power consumption of the left-on mode for the standart cotton programme at full load, PL (W)
"Cotton cupboard dry programme" used at full and partial load is the standard drying
programme to which the information in the label and the fiche relates, that this programme
is suitable for drying normal wet cotton laundry and that it is the most efficient programme in
terms of energy consumption for cotton.
* : Energy Label standard program (EN 61121:2012)
All the values on the chart are identified according to EN 61121:2012 standard. Consumption
values may vary from the values in the chart depending on laundry type, wringing speed,
ambient conditions and voltage levels.

5.5 Auxiliary functions

Audible warning
Drying machine makes an audible warning
when the program is completed. If you don't
want it to make an audible warning, press the
"Buzzer" button. When you press the Buzzer
button, a light will illuminate and no audible
warning will be made when the program
ends.
C
You can select this function
before or after the program
starts.
End time
If you prefer to dry your laundry at a later
time, you can delay start time of the program
up to 3 hours, 6 hours or 9 hours using the
Delay function.
Open the loading door and place the laundry.
Select the drying program.
Press the End Time selection button and
set the delay time you wish. When the End
Time button is pressed once, 3 hours delay is
selected and the delay indicator will light up.
If you press the same button again, 6 hours
delay will be selected and when you press for
Dryer / User Manual
Energy consumption values
Capacity (kg)
9 / 4,5
9
4,5
the third time, 9 hours delay will be selected.
If you press the End Time button once again,
the delay will be cancelled.
After the End Time selection is made, start
delayed running for the program selected
pressing the "Start/Stand-by" button.
C
Changing the end time
If you want to change the duration during
the countdown:
Cancel the program by turning the On/Off/
Program selection knob. Select the program
you want and repeat the End Time selection
process.
Cancelling the end time function
If you want to cancel the end time
countdown and start the program
immediately:
Cancel the program by turning the On/Off/
Program selection knob. Select the program
you want and press the Start/Stand-by
button.
Spin speed Approximate
in washing amount of
machine remaining
(rpm) humidity
1000 60%
1000 60%
800 40%
You can add or remove laundry
within end time. At the end of
the Time Delay countdown, the
Time Delay warning indicator
turns off and drying begins
Energy
consumption
value kWh
5,21 / 2,78
4,1
1,9
0,5
1,0
19 / EN