ViewSonic VS15741 User Manual page 28

• Display Setting Window
NOTE:
1. DVI-D output does not have hotplug EDID detection functionality. The system
only enables DVI-D output if the user plugs in the DVI-D cable before client boot
up.
2. Changing the refresh rate resolution will cause a confirmation window to pop up.
If the user does not click on "confirm" in 10 seconds, the previous display setting
will be restored.
3. If the common mode of two monitors cannot be found, a warning message will
pop up and the switching action will be discarded.
• Firmware Update Window
General
Overview
Display
Display
Con gure screen settings and layout
SD-T225
ViewSonic xxx
Use this output
Resolution:
Refresh rate:
Mirror/Extend
Overview
Firmware Update
Firmware Update
Update firmware and software
Local file system
Client Name: VSC-client
Enable force update
Browse
FTP server
Host Name:
Username:
Password:
Port: 21
10
Request Timeout: seconds
Enable force update
Browse Save
22
1920x1080
60.0 Hz
Extend
Close
Close