Table of Contents
Advertisement
13. Remove two screws.
Remove the tape fixing the lead wires.
Remove two hooks, and then remove the strobe unit and the speaker.
Screw (S6)
13. Remove the speaker.
Note: Speaker is fixed by double-sided tape.
The speaker and the lead wires are not included in the strobe unit.
Tip: Lead wire information
Yellow (Strobe)
Blue (Strobe)
Assembly Precautions:
Set the strobe unit after aligning it with the positioning pins.
Fix the lead wires by double-sided tape. Note that the wires should not be stacked.
Positioning pins
Hooks
Screw (S1)
Tape
Red (Speaker)
Black (Speaker)
— 22 —
Hooks
Strobe unit
Tape
Advertisement
Table of Contents
