Removing The Accessories - KitchenAid 5KHM9212EAC0 Instructions Manual

SETTINg UP YOUr HaND MIxEr
C
Paired accessories (Turbo beaters, dough
hooks) include one accessory with a collar
(D), and one without (C). Single accessories
come with a collar (D) (mixing rod) or
without (C) (whisk).
a
Insert the accessory without a collar (C)
3
into the smaller opening (A). Align and
push to lock into place.

removing the accessories

If the Hand Mixer is running, stop the
1
Hand Mixer by sliding the Power switch
to the "O" (Off) position. Unplug the
Hand Mixer from the electrical outlet.
10
D
Insert the accessory shaft with the collar
2
(D) into the larger opening (B) of the
Hand Mixer. Align the flanges on the
shaft with the slots in the opening. Push
to lock into place.
NOTE: An accessory shaft without a collar
may be used in either opening (A or B). Those
with a collar may only be used in the larger
opening (B).
b
Press the ejector button to release
2
the accessories from the Hand Mixer,
then remove them.
b
D