Cingular MUSTANG C810 User Manual page 88

Windows Windows
Mobile Version Mobile 2003
5.0 Support Support Code
Code (if different)
0x85020003 0x8004225E
0x85020004 0x8004225F
0x85020006 0x80040024
0x85020007 0x8004227E
0x85020008 0x80042263
0x85020009 0x80042262
0x8502000A 0x8004227D
0x8502000B
0x8502000C 0x8004225D
0x8502000D 0x800422BE
0x85030000 0x80140010
0x85030019 0x80140022
0x85030027
Error Message
network conditions.
The server could not be
reached. This can be
caused by temporary
network conditions.
Synchronization
interrupted.
Cannot connect with
current connection
settings. To change your
connection setting, tap
Settings.
The server could not be
reached. This can be
caused by temporary
network conditions.
Unable to connect. Voice
call is in progress.
The server could not be
reached. This can be
caused by temporary
network conditions.
The server could not be
reached. This can be
caused by temporary
network conditions.
Cannot connect with
current connection
settings. To change your
connection setting, tap
Settings.
The server could not be
reached. This can be
caused by temporary
network conditions.
Synchronization
interrupted.
You are roaming, and you
have chosen not to use
your schedule settings
while roaming.
ActiveSync was unable to
synchronize because your
wireless phone was off.
Exchange Server requires
certificates to log on.
Connect your device to
your PC on the corporate
88/125
Troubleshooting information
The connection to Exchange Server was
lost. This condition is generally
temporary. Try to sync again later.
The connection was ended by the user.
Re-establish the connection and try to
sync again.
This is typically caused by not having a
valid network or modem connection set
up. Check your connection settings and
try to sync again.
Due to poor network conditions, sync
with Exchange Server could not be
completed. This condition is generally
temporary. Try to sync again later.
A voice call was in progress and
interrupted sync. Connection is normally
resumed upon completion of the call.
Due to poor network conditions, sync
with Exchange Server could not be
completed. This condition is generally
temporary. Try to sync again later.
This condition is generally temporary.
Try to sync again later.
This is typically caused by not having a
valid network or modem connection set
up. Check your connection settings and
try to sync again.
This condition is generally temporary.
Try to sync again later.
The connection attempt was abruptly
ended. Try to sync again.
Try to sync again when you are within
your network coverage area. You can
sync manually while roaming if you are
willing to incur any roaming charges.
The phone is turned off. Turn the phone
on and try to sync again.
In environments where security
certificates are required, sync cannot be
completed until the proper certificate is
obtained. You may need to contact an