Installation - Sony MEX-N5200BT Operating Instructions Manual

Bluetooth audio system
Hide thumbs Also See for MEX-N5200BT:
Table of Contents

Advertisement

Available languages

Available languages

F:\#Work#\0830\4597143611\4597143611MEXN5200BTUC\01GB-
MEXN5200BTUC\040CD.fm
010COV.book Page 40 Tuesday, August 30, 2016 3:16 PM
where you purchased this unit, or the car
dealer, before installation.
Note
Before attaching the double-sided tape
the surface of the dashboard with a dry cloth.
Using the wired remote control
When using the steering wheel remote
control
Installation of the connection cable RC-SR1
(not supplied) is required before use.
1
To enable the steering wheel remote
control, select [SET STEERING]
CUSTOM] to make the registration (page 22).
When the registration completes, the
steering wheel remote control becomes
available.
Notes on installing the connection cable
RC-SR1 (not supplied)
• Refer to the support sites on the back cover for
details, then connect each lead properly to the
appropriate leads. Making an improper
connection may damage the unit.
• Depending on the type of car, be sure to insulate
the unused leads with electrical tape for safety.
• Do not connect this cable when the steering wheel
remote control is not used.
• Consulting the dealer or an experienced
technician for help is recommended.
When using the wired remote control
1
To enable the wired remote control, set [STR
CONTROL] in [SET STEERING] to [PRESET]
(page 22).

Installation

Removing the protection collar
and the bracket
Before installing the unit, remove the
protection collar
and the bracket
the unit.
1
Pinch both edges of the protection
collar
, then pull it out.
40
GB
, clean
2
Insert both release keys
click, and pull down the bracket
then pull up the unit to separate.
[EDIT
Face the hook inwards.
Mounting the unit in the
dashboard
• Before installing, make sure the catches on
both sides of the bracket
inwards 2 mm (
• For Japanese cars, see "Mounting the unit
in a Japanese car" (page 41).
1
Position the bracket
dashboard, then bend the claws
outward for a tight fit.
from
2
Mount the unit onto the bracket
then attach the protection collar
masterpage: Left
until they
,
are bent
3
/
in).
32
inside the
182 mm (7
1
/
in)
4
53 mm (2
1
/
in)
8
Catch
,
.
MEX-N5200BT
4-597-143-61(1)

Advertisement

Table of Contents
loading

Table of Contents