Introduction - NEC NP04WK1 Installation And Adjustment Manual

Introduction

M Packaged Parts
Check that the parts below are included in the package.
Wall adapter: 1 set
Slide arm: 1 set
The wall adapter and slide arm are assembled
upon shipment.
M4×8 mm screws: 4
These are used to mount the projector.
Wall plate: 1
This is used to mount the wall adapter in the
North American region.
* For the bolts or screws for mounting the
wall adapter to the wall, use bolts or screws
that are adapted to the wall surface.
M6×10 mm screws: 4
These are used to mount the wall plate to the
wall mount unit.
Wall adapter covers: 2
These are covers for the wall adapter. The two
covers are the same.
Washers: 4
Spacers: 4
These are used to mount the wall adapter to
the wall.
* For the bolts or screws for mounting the
wall adapter to the wall, use bolts or screws
that are adapted to the wall surface.
Hexagonal wrench: 1
This is a wrench for tightening
the safety lock screws.
Cautions on Installation: 1
These include safety precautions on installing
the wall mount unit, a list of the included parts
and the specifications.
Quick Install Guide: 1
This provides a simple description of the in-
stallation and adjustment procedures.
ENG-4