Power Management - Philips SmartControl Lite 233V5QSBP/75 User Manual

5. Power Management

5. Power Management
If you have VESA DPM compliance display card
or software installed in your PC, the monitor
can automatically reduce its power consumption
when not in use. If an input from a keyboard,
mouse or other input device is detected,
the monitor will 'wake up' automatically. The
following table shows the power consumption
and signaling of this automatic power saving
feature:
233V5QABP:
Power Management Definition
VESA
Video H-sync V-sync
Mode
Active ON Yes
Sleep
OFF No
(Standby)
Switch Off OFF -
233V5QSBP:
Power Management Definition
VESA
Video H-sync V-sync
Mode
Active ON Yes
Sleep
OFF No
(Standby)
Switch Off OFF -
233V5QHABP:
Power Management Definition
VESA
Video H-sync V-sync
Mode
Active ON Yes
Sleep
OFF No
(Standby)
Switch Off OFF -
Power Used LED Color
26.3 W (typ.)
Yes White
29.61 W(max.)
White
No 0.5W (typ.)
(blink)
- 0.5W (typ.) OFF
Power Used LED Color
26.23 W (typ.)
26.96 W(max.)
Yes 25.67 W (typ.) White
26.21 W(max.)
(for Analog only
model)
White
No 0.5W (typ.)
(blink)
- 0.5W (typ.) OFF
Power Used LED Color
25.14 W (typ.)
Yes White
30.97 W(max.)
White
No 0.5W (typ.)
(blink)
- 0.3W (typ.) OFF
The following setup is used to measure power
consumption on this monitor.
v Native resolution: 1920 x 1080
v Contrast: 50%
v Brightness: 250 nits
v Color temperature: 6500k with full white
pattern
Note
This data is subject to change without notice.
21