Connections; Connecting A Monitor Display; Connecting Headphones; Connecting The Power Cord - JVC VCB008 Instructions Manual

Connections

Connecting a monitor display

In order to view picture/video from iPod on
a monitor display, connect a monitor display
using a composite video cord (page 17).
Composite
video cord
(not supplied)

Connecting headphones

Be sure to turn down the volume before
connecting or putting on the headphones.
• Connecting the headphones deactivates the
speakers.
NOTE
If iPod is selected as the source, no sound is
heard from headphones.
Stereo
mini
plug
RV-NB90̲J.indd 9 RV-NB90̲J.indd 9
Monitor
(not supplied)
Headphones
(not supplied)

Connecting the power cord

Connect the power cord to a wall outlet only
after all other connections have been made.
Battery compartment
Unplug the AC power cord from the System
to supply the power through the batteries
in the battery compartment; otherwise, the
System does not work.
NOTE
• The power can also be supplied through the
batteries (page 4).
• When the System is turned off using the
STANDBY/ON button, the standby
mode is activated and the STANDBY lamp
lights in red.
• A small amount of power is always
consumed even while on standby.
CAUTION
• Only use JVC power cord provided for this
System to avoid malfunction or damage to
the System.
• Remove all the batteries when using the
power cord.
• Be sure to unplug the power cord from the
outlet when going out or when the System
is not in use for an extended period of time.
Power cord
(supplied)
AC outlet
9
12.3.30 2:21:36 PM 12.3.30 2:21:36 PM