- Remove the Tuner Amp Unit (2/2)
1. Remove the screw A, four screws C, and then
remove the Antenna Cable and Holder.
2. Remove the screw B.
3. Stretch the four tabs, and then remove the Tuner
Amp Unit.
- Remove the DSP Unit
1. Remove the three solder of tabs indicated by arrows,
and then remove the Case.
2. Disconnect the connector, and then remove the DSP
Unit.
DEH-P900R,P9050
Antenna Cable
Holder
B
Tuner Amp Unit
A
C
C
C
C
Case
DSP Unit
63