FH-P4000,P4000R
7.1.2 DISASSEMBLY
-
Removing the Case (not shown)
1. Remove the Case.
-
Removing the Panel Assy (Fig.1)
Remove the three screws and then remove the
Panel Assy.
-
Removing the CD Mechanism Module (Fig.1)
Remove the four screws.
Disconnect the connector and then remove the CD
Mechanism Module.
Note : Remove or tighten the screw A with supporting
the Chassis Unit by your hand from underneath.
Tighten the screws by turns started from A.
-
Removing the Chassis Unit (Fig.2)
Remove the two screws.
Remove the two screws and then remove the
Chassis Unit.
76
CD Mechanism Module
C
D
Panel Assy
Chassis Unit
B
A
Fig.1
Fig.2