Table of Contents
Advertisement
❹ Controlling the Projector over a LAN (PC Control Utility Pro 4/
Pro 5)
Using the utility software "PC Control Utility Pro 4" or "PC Control Utility Pro 5" available as a download, the
projector can be controlled from a computer over a LAN
PC Control Utility Pro 4 is a program compatible with Windows. (→ this page).
PC Control Utility Pro 5 is a program compatible with Mac OS. (→ page 152)
Control Functions
Power On/Off, signal selection, picture freeze, picture mute, audio mute, adjusting, error message notification, event
schedule.
This section provides an outline of preparation for use of PC Control Utility Pro 4/Pro 5. For information on how to use
PC Control Utility Pro 4/Pro 5, see Help of PC Control Utility Pro 4/Pro 5. (→ page 151, 152)
Step 1: Install PC Control Utility Pro 4/Pro 5 on the computer.
Step 2: Connect the projector to a LAN.
Step 3: Start PC Control Utility Pro 4/Pro 5.
TIP:
• PC Control Utility Pro 4 can be used with a serial connection.
Using on Windows
Step 1: Install PC Control Utility Pro 4 on the computer
NOTE:
• To install or uninstall the program, the Windows user account must have [Administrator] privilege (Windows 8.1, Windows 8,
Windows 7, Windows Vista and Windows XP)
• Exit all running programs before installation. If another program is running, the installation may not be completed.
1. Go to the Dukane or NEC website for the latest "PC Control Utility Pro 4" or "PC Control Utility Pro 5"
Visit: www.dukaneav.com and go to the Service page for downloads and links.
www.dukane.com/av/service/downloads.asp Or visit URL: www.nec-display.com/dl/en/index.html
Screen of PC Control Utility Pro 4
149
8. User Supportware
Advertisement
Table of Contents
