Calc-Clean Function; After The Calc-Clean Process - Philips Azur GC4250/12 Manual

ENGLISH
10

Calc-clean function

You can use the calc-clean function to remove scale and impurities.
Use the calc-clean function once every two weeks. If the water in
your area is very hard (i.e. when flakes come out from the
soleplate during ironing), the calc-clean function should be used
more frequently.
1 Set the steam control to position 0.
2 Fill the water tank to the maximum level.
Do not put vinegar or other descaling agents in the water tank.
C
3 Select the maximum ironing temperature.
4 Put the plug in the wall socket.
5 Unplug the iron when the temperature has been reached (you
will hear a double beep).
C
6 Hold the iron over the sink, press and hold the calc-clean
button and gently shake the iron to and fro.
Steam and boiling water will come out of the soleplate. Impurities and
B
flakes (if any) will be flushed out.
7 Release the calc-clean button as soon as all the water in the
tank has been used up.
Repeat the calc-clean process if the iron still contains a lot of impurities.

After the calc-clean process

- Put the plug in the wall socket and let the iron heat up to allow the
soleplate to dry.
- Unplug the iron when it has reached the set ironing temperature.
- Move the hot iron gently over a piece of used cloth to remove any
water stains that may have formed on the soleplate.
- Let the iron cool down before you store it.
Storage
1 Make sure the appliance is unplugged and set the steam control
to position 0.
2 Empty the water tank.
C
3 Put the iron on the heat-resistant protective cover.
Do not use the heat-resistant protective cover during ironing.