LG W2242T User Manual page 16

On Screen Display(OSD) Selection and Adjustment
Main menu
SETUP
S E T U P
S E T U P
MENU : Exit
-
: Adjust
+
: Adjust
SET : Select another
sub-menu
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled only when
the input signal is an analog signal.
Sub menu
To choose the language in which the
LANGUAGE
control names are displayed.
To adjust position of the OSD window
OSD
on the screen.
POSITION
If the output of the video card is different
WHITE
the required specifications, the color
BALANCE
level may deteriorate due to video
signal distortion. Using this function, the
signal level is adjusted to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors are present in the screen.
Use this function to set the power
POWER
INDICATOR indicator on the front side of the monitor
to ON or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.
4:3 IN WIDE To select the image size of the screen.
WIDE
* 4:3: Depending on the input video signal ratio,
it is automatically changed to an optimized screen
ratio. (The 1280X1024 input signal is changed
to 5:4 ratio and 1024X768 to 4:3.)
Resolution
1280x1024
1152x864
1024x768
800x600
640x480
720x480
The input signal which the ARC does not support the 'ORIGINAL'
is the following.
- The 19 inch monitor is 720x400,1280x768,1360x768,1440x900
- The 20.1 inch monitor is 720x400,1280x768,1360x768,1680x1050
- The 22 inch monitor is 720x400,1280x768,1360x768,1680x1050
FACTORY
Restore all factory default settings except
"LANGUAGE."
RESET
Press the
A14
Description
4:3
Screen ratio
5 : 4
4 : 3
4 : 3
4 : 3
4 : 3
3 : 2
button to reset immediately.