Mb Intelligent Tweaker(M.i.t.) - Gigabyte GA-G31MF-S2 User Manual

2-9

MB Intelligent Tweaker(M.I.T.)

Robust Graphics Booster
CPU Clock Ratio
Fine CPU Clock Ratio
CPU Frequency
CPU Host Clock Control
x CPU Host Frequency (Mhz)
PCI Express Frequency (Mhz)
Performance Enhance
System Memory Multiplier (SPD)
Memory Frequency (Mhz) 800
******** System Voltage Optimized
System Voltage Control
DDR2 OverVoltage Control
FSB OverVoltage Control
CPU Voltage Control
Normal CPU Vcore
: Move Enter: Select
F5: Previous Values
• Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory
and reduce the useful life of these components. This page is for advanced users only and
we recommend you not to alter the default settings to prevent system instability or other
unexpected results. (Inadequately altering the settings may result in system's failure to
boot. If this occurs, clear the CMOS values and reset the board to default values.)
• When the System Voltage Optimized item blinks in red, it is recommended that you set
the System Voltage Control item to Auto to optimize the system voltage settings.
Robust Graphics Booster
Robust Graphics Booster (R.G.B.) helps to enhance the performance of the graphics chip and
memory. Auto allows the BIOS to automatically set the R.G.B. mode based on system
configurations. Options are: Auto (default), Fast, Turbo.
CPU Clock Ratio
Allows you to alter the clock ratio for the installed CPU.
The item is present only if a CPU with unlocked clock ratio is installed.
Fine CPU Clock Ratio
Allows you to increases clock ratio by 0.5 for the installed CPU.
The item is present only if a CPU with unlocked clock ratio is installed.
CPU Frequency
Displays the current operating CPU frequency.
CPU Host Clock Control
Enables or disables the control of CPU host clock. Enabled will allow the CPU Host Frequency
item below to be configurable. Note: If your system fails to boot after overclocking, please wait for
20 seconds to allow for automated system reboot, or clear the CMOS values to reset the board to
default values. (Default: Disabled)
(Note) This item appears only if you install a CPU that supports this feature.
GA-G31MF-S2 Motherboard
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
MB Intelligent Tweaker(M.I.T.)
(Note)
(Note)
********
+/-/PU/PD: Value
F6: Fail-Safe Defaults
(Note)
(Note)
[Auto]
[7X]
[+0.5]
2.50GHz(333x7.5)
[Disabled]
333
[Auto]
[Standard]
[Auto]
800
[Manual]
[Normal]
[Normal]
[Normal]
1.22500V
F10: Save
- 46 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults