Toshiba TX62 Manual page 156

Using a USB Cable for Transferring Data
As shown in the illustration on the right, you can use a USB cable to connect your phone
to a PC, then send and receive the Contacts list, Calendar and Gallery data. For details
on transferring music data, see “Transferring Music from a PC to a Memory Card” (page
66). Before you connect the USB cable, the USB host driver and PC management
software My Mobile included on the CD-ROM supplied with your phone need to be
installed on the PC. This function supports USB 1.1 and USB 2.0. For details on the PC
operating environment required to use this function, refer to My Mobile.
Using a USB Cable for Sending Data
You can send the data of the Contacts list, Calendar and Gallery.
1. Follow the procedure below to connect your phone and a PC with a USB cable.
1) Open the external connector cover of your phone.
2) Insert the plug of the USB cable into the external connector.
3) Connect the USB cable to the USB port of the PC.
2. In standby mode, press
3. Settings Connectivity
156
. The main menu appears.
USB Data Transfer
Note
• When you send/receive data, flight
mode is set automatically. The
indicator appears at the top of the
display while flight mode is set,
except when a dial-up connection
was established.
• The following files cannot be sent.
• Files in Game&Application,
My Saved Pages and
Templates of Gallery
• Copyright protected files
File Transfer & Synchronisation