Gigabyte GA-EP45-DS5 User Manual page 96

Lga775 socket motherboard for intel coretm processor family/ intel pentium processor family/intel celeron processor family
Hide thumbs Also See for GA-EP45-DS5:
Table of Contents

Advertisement

Step 3:
When Setup correctly recognizes the Intel ICH10R SATA RAID/AHCI driver in the floppy disk, a
controller menu similar to Figure 3 below will appear. Use the up or down arrow key to select one of
the items displayed and press <Enter>. If you set the SATA RAID/AHCI Mode item in BIOS Setup to
RAID mode, select Intel(R) ICH8R/ICH9R/ICH10R SATA RAID Controller. (Select Intel(R) ICH10R
SATA AHCI Controller for AHCI mode.)
Windows Setup
ENTER=Select F3=Exit
If a message appears saying one or some file(s) cannot be found, please check the floppy disk
or copy the correct SATA RAID/AHCI driver again from the motherboard driver disk.
When the screen as shown below appears, press <Enter> to continue the driver installation from
the floppy disk. The driver installation will be finished in about one minute.
Windows Setup
Setup will load support for the following mass storage device(s):
Intel(R) ICH8R/ICH9R/ICH10R SATA RAID Controller
S=Specify Additional Device ENTER=Continue F3=Exit
GA-EP45-DS5 Motherboard
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
Intel(R) ESB2 SATA AHCI Controller
Intel(R) ICH7R/DH SATA AHCI Controller
Intel(R) ICH7M/MDH SATA AHCI Controller
Intel(R) ICH8R/DH/DO SATA AHCI Controller
Intel(R) ICH8M-E/M SATA AHCI Controller
Intel(R) ICH9R/DO/DH SATA AHCI Controller
Intel(R) ICH9M-E/M SATA AHCI Controller
Intel(R) ICH10R SATA AHCI Controller
Intel(R) ESB2 SATA RAID Controller
Intel(R) ICH7R/DH SATA RAID Controller
Intel(R) ICH7MDH SATA RAID Controller
Intel(R) ICH8R/ICH9R/ICH10R SATA RAID Controller
Intel(R) ICH8M-E/ICH9M-E SATA RAID Controller
* To specify additional SCSI adapters, CD-ROM drives, or special
disk controllers for use with Windows, including those for
which you have a device support disk from a mass storage device
manufacturer, press S.
* If you do not have any device support disks from a mass storage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.
Figure 3
Figure 4
- 96 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents