Gigabyte GA-EP35-DS3 User Manual page 54

******** System Voltage Optimized
System Voltage Control
Determines whether to manually set the system voltages. Auto lets BIOS automatically set the
system voltages as required. Manual allows all voltage control items below to be configurable.
(Default: Manual)
DDR2 OverVoltage Control
Allows you to set memory voltage.
Normal
+0.1V ~ +0.7V
Note: Increasing memory voltage may result in damage to the memory.
PCI-E OverVoltage Control
Allows you to to set PCIe voltage.
Normal
+0.1V ~ +0.3V
FSB OverVoltage Control
Allows you to set the Front Side Bus voltage.
Normal
+0.1V ~ +0.3V
(G)MCH OverVoltage Control
Allows you to set the North Bridge voltage.
Normal
+0.1V ~ +0.3V
CPU Voltage Control
Allows you to set the CPU voltage. Normal sets the CPU voltage as required. The adjustable
range is dependent on the CPU being installed. (Default: Normal)
Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the
CPU.
Normal CPU Vcore
Displays the normal operating voltage of your CPU.
GA-EP35-DS3R/DS3 Motherboard
********
Supplies the memory voltage as required. (Default)
Increases memory voltage by 0.1V to 0.7V at 0.1V increment.
Supplies the PCIe bus voltage as required. (Default)
Increases PCIe bus voltage by 0.1V to 0.3V at 0.1V increment.
Supplies the FSB voltage as required. (Default)
Increases FSB voltage by 0.1V to 0.3V at 0.1V increment.
Supplies the North Bridge voltage as required. (Default)
Increases North Bridge voltage by 0.1V to 0.3V at 0.1V increment.
- 54 -