Table of Contents
Advertisement
Screen Menu Options
Auto
Auto
Adjustment (RGB1 (PC) mode only)
Adjustment (RGB1 (PC) mode only)
- Automatically adjusts picture position and minimizes image shaking.
- If the image is still not correct, your Monitor is functioning properly but needs further adjustment.
1. Press the AUTO CONFIG. button to run Auto configure.
• If the position of the image is still not correct, try Auto adjustment again.
2. If picture needs to be adjusted more after Auto adjustment in RGB1 mode, you can
manually adjust the image's
Adjusting Horizontal/ V
Adjusting Horizontal/ V
- You can only adjust
V-POSITION/H-POSITION
modes.
1. Press the MENU button and then use
G
2. Press the
button and then use
G
3. Press the
button and then use
4. Press the
G
button and then use the
desired horizontal or vertical position.
• The adjustment range of
• The adjustment range of
• Based on the PC resolution, the adjustment range of
change.
• Based on input signal, the position of the picture may not change even though you
have adjusted the horizontal or vertical position with this function.
5. Press the MENU button.
Picture Phase
Adjustments (RGB1 (PC) mode only)
Picture Phase
Adjustments (RGB1 (PC) mode only)
- If the picture isn't clear after auto adjustment and especially if characters are still jittery, adjust the picture phase
manually.
1. Press the MENU button and then use
G
2. Press the
button and then use
G
3. Press the
button and then use
G
4. Press the
button and then use the
• The adjustment range of
5. Press the MENU button.
Initializing (Reset to original factory value)
Initializing (Reset to original factory value)
- To initialize the adjusted value, select
G
then press the
button.
V-POSITION
/
H-POSITION
ertical Position
ertical Position
in DTV (480p,720p,1080i), COMPONENT (480p,720p,1080i), RGB1 (PC)
D / E
button to select the SCREEN menu.
D / E
button to select
button to select
D / E
F / G
button to make adjustments until you get
V-POSITION
is -50 ~ +50.
H-POSITION
is -100 ~ +100.
button to select the SCREEN menu.
D / E
D / E
button to select
D / E
button to select
F / G
button to adjust phase.
PHASE
is 0 ~ 63.
RESET
with the
D / E
and
PHASE
.
SCREEN ADJ.
.
V-POSITION
or
H-POSITION
V-POSITION/H-POSITION
may
SCREEN ADJ.
.
PHASE
.
button in step 3 of 'picture phase adjustments' and
SCREEN
SCREEN ADJ.
G
TO SET
VGA MODE
ARC
.
PIP/DW
ZOOM
SCREEN ADJ.
AUTO CONFIG.
V-POSITION
G
0
H-POSITION
PHASE
RESET
SCREEN ADJ.
AUTO CONFIG.
V-POSITION
H-POSITION
G
PHASE
30
RESET
19
Advertisement
Table of Contents
