Related Manuals for Swann SR11035
Summary of Contents for Swann SR11035
- Page 1 Retro Under Counter Fridge Installation and User Guide For model: SR11035 (all colours) Swan Service Helpline 0844 567 9600 v1.0 SR11035_IM.indd 1 07/11/2017 11:39...
-
Page 2: Important Safeguards
Important Safeguards • Do not connect your appliance information and facilities available. to the electricity supply until all • See installation section for packing and transit protectors information on suitable location. have been removed. • On delivery, check to make •... - Page 3 Important Safeguards means to accelerate the manufacturer, its service agent defrosting process, other than or similarly qualified persons in those recommended by the order to avoid a hazard. manufacturer. • The plug must be accessible after the installation. WARNING: Do not damage the refrigerant circuit.
-
Page 4: Your Refrigerator
Your Refrigerator Dairy and multi- purpose guards Ice box Thermostat & bulb Refrigerator shelf Bottle shelf Vegetable & salad crisper drawers CHANGING THE BULB The LED lamp is designed for many thousands of hours use. It must be changed by qualified personnel only SR11035_IM.indd 4 07/11/2017 11:39... -
Page 5: Installation Notes
Installation Notes It is important that upon receipt you stand your appliance upright for at least 4 hours before switching on to allow the system to settle. Please note that the door cannot be reversed on this product. 1. The appliance should not be tilted more than 45 degrees when you move it. Do not use force on any part such as the condenser, the door or handle. -
Page 6: Under Counter Installation
Installation Notes 4. Ensure the supply voltage of scoket is same as rating label. 5. The plug must be properly inserted to the wall socket. 6. The mains supply socked must be earthed - preferably with a switch. If it is not earthed, do NOT install this appliance there. - Page 7 Under Counter Installation 2. Carefully pry the top panel free as shown here, taking care not to damage it. 3. Remove the lid bracket (A). Fit the upper hinge fitting (B) Fit the decorative part (C provided) as shown here. Notes : The height of the fridge is around 86 cm after removal of the top panel.
-
Page 8: First Time Use
Refitting the Top Panel Re-fitting the top panel is a reversal of the removal procedure. 1. Remove the decorative parts 2. Refit the lid panel and refit the screws NOTE: The top of the refrigerator is not designed to take heavy weight. Please do not put heavy items on top of the refrigerator. -
Page 9: Food Storage Tips
Food Storage Tips Dairy and muliti-purpose Guard • Store fatty foods, like butter and cheese. • Store small, packed foods, like milk, yogurt and beverages. Refrigerator compartment: 1°C to 5°C This is the area where the food should be stored to be kept cold/chilled: •... -
Page 10: Cleaning And Maintenance
Cleaning & Maintenance DAILY CLEANING PERIODIC MAINTENANCE The outside of your refrigerator can be From time to time, it may be necessary to cleaned using a soft cloth moistened with a perform more extensive cleaning to keep your mild detergent solution. Wipe dry with kitchen refrigerator in top condition and to maintain towel. -
Page 11: Troubleshooting
Troubleshooting 1. If the refrigerator does not run: Check the supply voltage is available at the socket and check that the power plug is correctly connected. 2. If the refrigerator does not become cold enough: a. is the thermostat is set too low? (setting 1 is warmest setting 7 is coldest) b. -
Page 12: Service And Spares
Service and Spares If you experience any problems at all with your refrigerator or require spare parts, expert help is just a phone call away! 0844 567 9600 You will need to quote the model and serial number of your appliance. This is printed on the service label just inside the door under the thermostat. -
Page 13: Bs Plug Wiring
BS Plug Wiring The wires in the mains lead are coloured in accordance with the following code: BLUE NEUTRAL BROWN LIVE GREEN/YELLOW EARTH As the colours of the wire in the mains lead of this appliance may not correspond with the colour markings identifying the terminals on your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black. -
Page 14: Warranty
Warranty This product is guaranteed for one year from the date of original purchase. If any defect arises due to faulty materials of workmanship the faulty product will be repaired, refunded or replaced at our discretion. The following conditions apply: The product must have been purchased from new. - Page 15 Swan Brand Heritage Camden St, Birmingham Did you know... Components for the Swan Teasmade were still being made at the original Bullpitt & Sons factory on Camden St, Birmingham as recently as 2006. Please visit our website at: www.swan-brand.co.uk For more information and history of the Swan Brand SR11035_IM.indd 15 07/11/2017 11:39...
- Page 16 www.swan-brand.co.uk 2 year Est. 1 931 GUARANTEE Scan this QR code We love we’re proud Find us on Facebook to hear about what we do of our quality our story Copyright © 2012 Swan Products Ltd. PO Box 3117, Stoke-on-Trent ST4 9GD * on selected lines SR11035_IM.indd 16 07/11/2017 11:39...