Resume By Alarm - Gigabyte GA-8SMMLP User Manual

When AC-pow er back to the sy stem, the sy stem w ill be in "On" state.
8On
C IRQ [3-7, 9-15], NMI
8Disabled
8Enabled
C ModemRingOn/WakeOnLAN
8Disabled
8Enabled
C PME Event Wake Up
8Disabled
8Enabled
C Power On by Keyboard
8Passw ord
8Any Key
CPower On by Mouse
8Enabled
8Disabled
C Resume by Alarm
You can set "Resume by Alarm" item to enabled and key in Data/time to pow er on sy stem.
8Disabled
8Enabled
If RTC Alarm Lead To Pow er On is Enabled.
Month Alarm :
Day (of Month) :
Time ( hh: mm: ss) :
C Power LED i n S1 state
8Blinking
8Dual/OFF
GA-8SMMLP Series Motherboard
Disable this function.
Enable this function. (Default v alue)
Disable Modem Ring on/w ake on Lan function.
Enable Modem Ring on/w ake on Lan. (Default Value)
Disable this function.
Enable PME Ev ent Wake up. (Default Value)
Input passw ord (from 1 to 8 characters) and press Enter to set the Key board
Pow er On Passw ord.(Default Value)
Set Key board pow er on by any key .
Enable Pow er On by Mouse function.
Disable this function. (Default Value)
Disable this function. (Default Value)
Enable alarm function to POWER ON sy stem.
NA, 1~12
1~31
(0~23) : (0~59) : (0~59)
In standby mode(S1), pow er LED w ill blink. (Default Value)
In standby mode(S1):
a. If use single color LED, pow er LED w ill turn off.
b. If use dual color LED, pow er LED w ill turn to another color.
- 36 -