Using The Controls - LG LP0711WNR/00 Owner's Manual

USING THE CONTROLS

Control panel buttons shown. Operation using the remote control is the same, unless
specifically noted.
1. COOLING MODE
· Press MODE button to choose Cool
mode, the Cool mode indicator will flash.
· Press UP or DOWN button to set room
temperature between
· Press SPEED button (or High/Low button)
to select high, low fan speed.
2. FAN MODE
· Press MODE button (or Fan button) to
choose Fan mode, the Fan mode indicator
will flash.
Select the fan speed by press FAN button
or press High / Low button directly.
· The temperature can not be set.
3. DRY MODE
· Select Dry button for dehumidify Mode.
In Dry mode fan speed is preset. Speed
button is not available. The temperature
can't be set either.
· Press Swing button to make the louver swing
(use remote control only).
NOTE
Always point the remote at the sensor. The remote may not work if the
sensor is in bright light or if there is not a clear path between the remote
and the sensor.
10
.
62 F to 86 F
H O W TO U S E
4. TIMER MODE
· When the appliance is switch off, press
Timer button to set timer-on.
· Press Up or Down button to adjust time
from 1 hour to 24 hours. The Time
on indicator will flash.
· When the appliance is running, press
Timer button to set timer-off.
5. SLEEP MODE
· Setting sleep mode, the temperature
will rise 1 after 2 hours, and another 2
hours later, rise 1
· Then it will keep steady and low fan blow.