Table of Contents
Advertisement
USB-HDD
Select your boot device priority by USB-HDD.
LAN
Select your boot device priority by LAN.
Disabled
Select your boot device priority by Disabled.
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360K type is
40 tracks 720K, 1.2M and 1.44M are all 80 tracks.
Disabled
BIOS will not search for the type of floppy disk drive by track number. Note
that there will not be any warning message if the drive installed is 360 K.
(Default value)
Enabled
BIOS searches for floppy disk drive to determine it is 40 or 80 tracks. Note
that BIOS can not tell from 720 K, 1.2 M or 1.44 M drive type as they are
all 80tracks.
Password Check
System
The system can not boot and can not access to Setup page will be denied
if the correct password is not entered at the prompt.
Setup
The system will boot, but access to Setup will be denied if the correct
password is not entered at the prompt. (Default value)
CPU Hyper-Threading
Disabled
Disable CPU Hyper Threading.
Enabled
Enable CPU Hyper Threading Feature. Please note that this feature is only
working for operating system with multi processors mode supported.
(Default value)
Flexbile AGP 8X
Auto
Automatically set AGP transfer rate according to AGP compatibility and stability.
(Default value)
4X
Set APG transfer rate to 4X mode no matter what the AGP transfer rate the card is.
Init Display First
Select the first initation of the monitor display from AGP or PCI VGA card.
PCI
Set Init Display First to PCI.
AGP
Set Init Display First to AGP. (Default value)
GA-8S648FXM Motherboard
#
- 38 -
Advertisement
Table of Contents
