Table of Contents
Advertisement
Connect Machine to a Wireless Network
The following procedures are detailed information for network settings.
Activate the Wireless Network
a
Turn on the machine.
When the following message appears, touch the
"OK" key.
b
Touch
in the home screen.
The network settings screen appears.
Memo
• Another way to access the "Network" menu is
to click
located at the bottom of the home
screen.
c
Select "ON" for "WLAN Enable".
Your machine will begin to emit the wireless
network signal.
6
Memo
• Another way to turn "ON" the "WLAN Enable" is
by selecting "Yes" when the message below
appears in the "Setup Wizard".
Set up the Wireless Network
Wireless LAN connection can be set up by using the
wizard (recommended) or alternative method.
■ Requirements for the wireless network
connection
The wireless network connection complies with IEEE
802.11 n/g/b standards and uses the 2.4 GHz frequency.
Memo
• A wireless network cannot be set up with WPA/
WPA2 Enterprise. For the authentication
methods your machine supports, see "Err-03"
on page 14.
■ Connect Using Setup Wizard
(Recommended)
a
The Wireless Network Name (SSID) & Network
Password (KEY)* are required to connect your
machine to a wireless network.
*
Network Password is also described as the
Network Key, Security Key, or Encryption Key.
Network Name (SSID)
Network Password
(Network Key)
Advertisement
Table of Contents
