Gigabyte GA-8PE667 User Manual page 64

(3) Press "Enter" to enter "BIOS FEATURES SETUP" menu. Use the arrows to highlight the item "1st
Boot Device", and then use the "Page Up" or "Page Down" keys to select "Floppy".
( C ) 2001 American Megatrends, Inc. All Rights Reserved
1st Boot Device
2nd Boot Device
3rd Boot Device
S.M .A.R.T. for Hard Disks
BootUp Num-Lock
Floppy Drive Seek
Password Check
(4) Press "ESC" to go back to previous screen. Use the arrows to highlight the item "SAVE & EXIT
SETUP" then press "Enter". System will ask "SAVE to CMOS and EXIT (Y/N)?" Press "Y" and
"Enter" keys to confirm. Now the system will reboot automatically, the new BIOS setting will be taken
effect next boot-up.
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP / PCI CONFIGURATION
LOAD BIOS DEFAULTS
LOAD SETUP DEFAULTS
ESC: Quit hifg
F6: Load BIOS Defaults
GA-8PE667 Motherboard
AMIBIOS SETUP - BIOS FEATURES SETUP
: Floppy
: IDE-0
: CDROM
: Disabled
: On
: Disabled
: Setup
AMIBIOS SIM PLE SETUP UTILITY - VERSION 1.24b
(C) 2001 American Megatrends, Inc. All Rights Reserved
Save to CMOS and EXIT (Y/N)? Y
: Select Item (Shift)F2 : Change Color
F7: Load Setup Defaults
Save Data to CM OS & Exit SETUP
- 60 -
ESC: Quit hifg: Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2: Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
INTEGRATED PERIPHERALS
HARDWARE MONITOR & M ISC SETUP
SUPERVISOR PASSWORD
USER PASSWORD
IDE HDD AUTO DETECTION
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
F5: Old Values
F10:Save & Exit