Base Memory; Extended Memory - Gigabyte GA-8LS533 User Manual

! ! ! ! ! Floppy 3 Mode Support (for Japan Area)
!Disabled
!Drive A
!Drive B
!Both
! ! ! ! ! Halt on
The category determines whether the computer will stop if an error is detected during power up.
!All Errors
!No Errors
!All, But Keyboard
!All, But Diskette
!All, But Disk/Key
! ! ! ! ! Memory
The category is display-only which is determined by POST (Power On Self Test) of the BIOS.

Base Memory

The POST of the BIOS will determine the amount of base (or conventional) memory installed in
the system.
The value of the base memory is typically 512K for systems with 512K memory installed on the
motherboard, or 640K for systems with 640K or more memory installed on the motherboard.

Extended Memory

The BIOS determines how much extended memory is present during the POST.
This is the amount of memory located above 1MB in the CPU's memory address map.
GA-8LS533 Series Motherboard
Normal Floppy Drive. (Default value)
Drive A is 3 mode Floppy Drive.
Drive B is 3 mode Floppy Drive.
Drive A & B are 3 mode Floppy Drives.
Whenever the BIOS detects a non-fatal error the system will be stopped.
The system boot will not stop for any error that may be detected
and you will be prompted.
The system boot will not stop for a keyboard error; it will stop for
all other errors. (Default value)
The system boot will not stop for a disk error; it will stop for all
other errors.
The system boot will not stop for a keyboard or disk error; it will
stop for all other errors.
- 32 -