Deactivating/Disconnecting The Wlan Device; Configuring The Wireless Lan; Connection To The Network - Fujitsu EM7455D2 Operating Manual

Troubleshooting the WLAN
Causes and countermeasures for troubles you may encounter while using your
wireless LAN are described in the following table.
Problem
Unavailable network connection
Fujitsu
Possible Cause
Incorrect network name (SSID)
or network key
Weak received signal strength
and/or link quality
Possible Solution
Ad hoc connection: verify that
the network names (SSID's)
and network keys (WEP) of
all computers to be connected
have been configured correctly.
SSID's and WEP key values
must be identical on each
machine.
Access Point (Infrastructure)
connection: set the network
name (SSID) and network key
to the same values as those of
the access point.
Set the Network Authentication
value identically to that of the
Access Point. Please consult
your network administrator for
this value, if necessary.
Ad hoc connection: Retry
connection after shortening
the distance to the destination
computer or removing any
obstacles for better sight.
Access Point (Infrastructure)
connection: Retry connection
after shortening the distance to
the access point or removing
any obstacles for better sight.
Appendix
110