Table of Contents
Advertisement
EcoStart
The
EcoStart
function allows you to take
advantage of time variable economy
rates of electricity. Before you can use
this option, you must set up to three
electricity rate time zones (see "Settings
menu, EcoStart").
You then set the latest time at which the
program selected should end.
The dishwasher will start automatically
in the lowest rate zone within the time
set.
Use the arrow buttons to set the
hour and confirm with OK.
The hour will be saved and the minute
number pad will be highlighted.
Use the arrow buttons to set the
minutes and confirm with OK.
The estimated start time of the program
selected will appear in the display.
The and Start indicator lights will
light up.
The program selected will start auto-
matically in the most economical time
period and finish no later than at the fin-
ish time set.
The time left will appear in the display,
the indicator light will go out and the
indicator light for the Start button will
light up.
Changing or deleting set times
You can change the set times or the
program before the start time in the dis-
play is reached.
Press the button.
Use the arrow buttons to select
the setting you want to change and
confirm with OK.
Use the arrow buttons to select
the
or
Change
Delete
confirm with OK.
After confirming the
you can change the set time.
After confirming the
program duration will appear in the dis-
play and the program will start.
The indicator light will go out and the
Start indicator light will light up.
If you open and close the door again
before the start time is reached, the
message
Continue with Start
in the display. Press the Start button
to restart the FlexiTimer.
Options
function and
function,
Change
function, the
Delete
will appear
57
Advertisement
Table of Contents
