Fujitsu Stylistic ST5110 User Manual page 16

Niechen_UG.book Page 5 Thursday, July 14, 2005 3:52 PM
Figure 1-4. Stylistic ST5000 Series Tablet PC Features (Top View)
Top Features:
• Pen: The main input device that you use to execute
programs and enter data. A pen holder is built into
the Tablet PC to store the pen when not in use.
• Pen Tether Point: The pen tether point is used to
attach a pen tether to help prevent loss of the pen.
• PC Card slot: Allows you to insert a Type I or Type II
PCMCIA Card † in the system.
• PC Card Eject Button: The PC Card eject button is
used to remove a PC Card from the PC Card slot.
• Air flow vents: Provides secondary cooling for
processor.
To protect your notebook from damage
and to optimize system performance, be
sure to keep all air all vents unobstructed,
clean, and clear of debris. This may
require periodic cleaning, depending upon
the environment in which the system is
used.
Do not operate the notebook in areas
where the air vents can be obstructed,
such as in tight enclosures or on soft
surfaces like a bed or cushion.
G e t t i n g S t a r t e d
Pen Holder
Pen Tether Point
PC Card Slot
PC Card
Eject Button
Air flow vents
SD Card/Memory Stick Slot
IrDA/FIR Port
Smart Card Slot
1
• SD Card/Memory Stick Slot: The Secure Digital (SD)
card/Memory Stick slot allows you to insert a flash
†
memory card for data storage. Flash memory cards
allow you to transfer data to and from a variety of
different digital devices.
• IrDA/FIR port: Provides an infrared interface for
communication with devices compliant with IrDA
Standard Revision 1.1.
• Smart Card Slot: The dedicated Smart Card slot
allows you to insert a Smart Card
store such data as medical information or electronic
"cash".
† These peripherals and accessories are sold separately.
†
on which you can
5