Download Print this page

Kenwood KMM040 Series Instructions Manual page 3

Hide thumbs Also See for KMM040 Series:

Advertisement

know your Kenwood kitchen machine
safety
Read these instructions carefully and retain for future reference.
G
Remove all packaging and any labels.
G
Switch off and unplug before fitting or removing
G
tools/attachments, after use and before cleaning.
Keep your fingers away from moving parts and fitted
G
attachments.
Never leave the machine on unattended.
G
Never use a damaged machine. Get it checked or repaired: see
G
'service and customer care'.
Never use an unauthorised attachment or more than one
G
attachment at once.
Never exceed the maximum capacities.
G
When using an attachment, read the safety instructions that come
G
with it.
Take care when lifting this appliance as it is heavy. Ensure the head
G
is locked and that the bowl, tools, outlet covers and cord are
secure before lifting.
Never let the cord hang down where a child could grab it.
G
Never let the power unit, cord or plug get wet.
G
Misuse of your appliance can result in injury.
G
Appliances can be used by persons with reduced physical,
G
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and if they
understand the hazards involved.
This appliance shall not be used by children. Keep the appliance
G
and its cord out of reach of children.
Children should be supervised to ensure that they do not play
G
with the appliance.
Only use the appliance for its intended domestic use. Kenwood
G
will not accept any liability if the appliance is subject to improper
use, or failure to comply with these instructions.
before plugging in
important - UK only
Make sure your electricity supply is the same as the one shown on the
G
underside of your machine.
The wires in the cord are coloured as follows:
G
Green and Yellow = Earth, Blue = Neutral, Brown = Live.
The appliance must be protected by a 13A approved (BS1362) fuse.
G
WARNING: THIS APPLIANCE MUST BE EARTHED.
G
Note:
For non-rewireable plugs the fuse cover MUST be refitted when replacing the fuse. If the fuse cover is
G
lost then the plug must not be used until a replacement can be obtained. The correct fuse cover is
identified by colour and a replacement may be obtained from your Kenwood Authorised Repairer (see
Service).
If a non-rewireable plug is cut off it must be DESTROYED IMMEDIATELY. An electric shock hazard may
G
arise if an unwanted non-rewireable plug is inadvertently inserted into a 13A socket outlet.
This appliance conforms to EC directive 2004/108/EC on Electromagnetic Compatibility and EC
G
regulation no. 1935/2004 of 27/10/2004 on materials intended for contact with food.
3

Advertisement

loading

This manual is also suitable for:

Kmc030 seriesKmm075Kmm0400w200110890wkmm04007