Table of Contents
Advertisement
The following safety information must be observed to insure maximum
personal safety during the operation at this meter:
1. Do not use the meter if the meter or test leads look damaged, or if you
suspect that the meter is not operating properly.
2. Use caution when working above 60V dc or 30V ac rms. Such voltages pose
a shock hazard.
3. When Using the probes, keep your fingers behind the finger guards on the
probes.
4. Measuring voltage which exceeds the limits of the clampmeter may damage
the meter and expose the operator to a shock hazard. Always recognize the
meter voltage limits as stated on the front of the meter.
5. If the equipment is used in a manner not specified by the manufacturer, the
protection provided the equipment may be impaired.
SAFETY INFORMATION
1
Advertisement
Table of Contents
