LG LSMC3089BD Service Manual page 19

H. ASSEMBLING DOOR
(1) When mounting the door assembly to the oven
assembly, be sure to adjust the door assembly
parallel to the chassis. Also adjust so the door has no
play between the inner door surface and oven frame
assembly. If the door assembly is not mounted
properly, microwaves may leak from the clearance
between the door and the oven.
Space
I. REMOVING THE VENTILATION MOTOR
(1) Remove the mounting plate by loosening
mounting plate screws (1 or 2 screws)
securing it to the back plate.
(See Figure 14)
(2) Remove MOUNT ALL loosening one screw
loosening one screw securing the ventilation Motor
and back plate. (See Figure 15-a)
(3) Carefully pull the ventilation motor ASS'Y out of
the microwave oven. (See Figure 15-b)
Figure 14
MOUNT, ALL
Figure 15-a
J. REPLACING THE HUMIDITY SENSOR
(1) Remove the sensor by removing two screws
(2) Mount the new humidity sensor to the air duct.
(1 or 2 screws)
Figure 15-b
7-9
(For sensor model only)
securing it to the air duct. (See Figure 15-c).
Figure 15-c