Philips 50PUN61 2/61 Series User Manual page 6

to allow curtains or other objects to
cover the vents of the TV set.
If inadvertently, the TV set may be damaged!
•
Before connecting the TV set to a
power outlet, make sure the outlet
voltage is consistent with the values
printed on the back of the TV set. If
both voltage values do not match,
do not connect the TV to the power
outlet.
•
If your TV needs to be moved into the
storage room for storage, first remove
its base from the TV set. Do not place
the TV set flat against its back when
its base is not removed.
Risk of injury, fire or power cord damage!
•
Do not put the TV or any objects
upon the power line.
•
For easy removal of the TV's power
cord from the power outlet, a smooth
and easy access to the power cord
should always be kept.
•
When pulling out the power cord, be
sure to pull it from its plug part, and
never pull the cable.
•
Before the thunderstorm comes,
please cut off the connection
between the TV set, the power
outlet and the antenna. During a
thunderstorm, do not touch any part,
power cord or antenna cable of the
TV set!
Risk of hearing loss!
•
Do not set the headset volume too
high and don't use the headset for a
long time.
Low temperatures
•
If the TV set is transported at an
ambient temperature below 5 °C or
41 °F, please wait for some time after
the TV is taken out of the box until
the TV's temperature returns to room
temperature before it is connected to
the power outlet.
4
EN-GB
Screen protection
•
Please try to avoid rendering fixed
images on the screen. A so-called
fixed image means an image stays
on the screen for a long time. For
example, on-screen menus, black
bars, and time display. If you must
use fixed images, please reduce
screen contrast and brightness to
avoid screen damage.
•
Remove the power cord before
cleaning the TV.
•
Use a slightly damp, soft cloth to
clean the TV set and its frame. Do
not use such substances as alcohol,
chemicals or household cleaners to
clean the TV set.
•
If inadvertently, the TV screen may
be damaged! Do not use items to
touch, push, rub or strike the screen.
•
To avoid warping and fading, please
wipe the water droplets as soon as
possible.
Note
Static images may cause permanent damage
to the TV screen
•
Do not display static images on the LCD/
LED screen for more than two hours, as this
can cause ghosting. To prevent ghosting,
please reduce the brightness and contrast
of the screen.
•
Watching TV in 4:3 format for a long time
may leave different marks on the left and
right edges of the screen and the border of
the image. Avoid using this mode for a long
time.
•
Long-term display of static images in
videos and games or computers can cause
some blurring and ghosting due to screen
burn. Please correspondingly reduce the
screen brightness and contrast when using
the TV set in this way.
The ghosting, partial ghosting and other
traces displayed on the TV screen for the
above reasons are not within the scope of
this warranty.