Table of Contents
Advertisement
Setup
Presentation Timer
The presentation is given while checking the timer displayed on the
screen.
The gauge display allows the remaining time to be known at a glance.
Select the item name "Presentation Timer" and select the setting contents
with the SELECT (
) buttons.
Setting contents: Off, 10 min., 20 min., 30 min., 40 min., 50 min., 60 min.
To start the timer...
Press the MENU button and open the menu.
The timer display will appear at the lower right and the timer will start.
[Timer Display]
The blue gauge indicates the remaining time. When the gauge disappears,the
time is up.
The gauge continues to be displayed when the timer is stopped.
• Press the ENTER button to restart the timer. The timer will start with the
same time setting.
• Press the CANCEL button to close the timer display. The timer setting will
return to "Off".
Moving the Position of the Timer Display
The SELECT (
) buttons on the remote control permit movement within
the movable range of the timer display.
Note:
* The timer display will be closed while the menu or the quick menu is displayed, and while a message is displayed; however, the timer will
still be operating at such times. Also, the timer will not be displayed unless a signal is being input.
* While the presentation timer is being displayed, screen movement will not be possible in the zoom mode.
Volume
This function adjusts the volume of the built-in speaker.
Select the item name [Volume] and adjust the sound level with the SELECT
(
) buttons.
Gauge (Blue)
When the remaining time is
"0" (Gray)
E-50
Movable Range of the Timer Display
Advertisement
Chapters
Table of Contents
