Hibernation (Save-To-Disk) Feature; Windows Power Management; Restarting The System - Fujitsu LifeBook P3010 User Manual

Hibernation (Save-to-Disk) Feature

The Hibernation feature saves the contents of your notebook's system memory to the hard drive as a part
of the Suspend/Resume mode. You can enable or disable this feature.
Enable or Disable the Hibernation Feature
The default settings are not enabled. To enable or disable the Hibernation feature follow these steps:
1
From the Start menu, select Settings, and then select Control Panel.
2
From the Control Panel select Power Options.
3
Select the Hibernate tab. Select the box to enable or disable this feature.

Windows Power Management

The Power Options icon located in the Windows Control Panel allows you to configure some of the power
management settings. For example, you can use the Power Options to set the timeout values for turning
off the display and hard disks whether you are running the notebook on battery power or one of the
adapters.

Restarting the System

If your system is on and you need to restart it, be sure that you use the following procedure.
1
Click the [Start] button, and then click Turn Off Computer.
2
Select the Restart option. Your notebook will shut down and then reboot.
T
URNING OFF YOUR NOTEBOOK WITHOUT EXITING
10
SECONDS OF THE NOTEBOOK BEING SHUT OFF MAY CAUSE AN ERROR WHEN YOU START THE NEXT
.
TIME
W
INDOWS OR TURNING ON YOUR NOTEBOOK WITHIN
50 - Power Management