Whirlpool WTW7500GW Use & Care Manual page 12

11.
Touch and hold START/PAUSE
button to begin wash cycle
Touch and hold the START/PAUSE button to start the wash
cycle. When the cycle has finished, the end-of-cycle signal
will sound (if set). Promptly remove items when cycle is done
to avoid odor, reduce wrinkling, and reduce rusting of metal
hooks, zippers, and snaps.
Unlocking the lid to add items
If you need to open the lid to add one or two missed items:
Touch the START/PAUSE button to pause the washer;
the lid will unlock once the washer movement has stopped.
This may take several minutes if the load was spinning at
a high speed. Then close lid and touch and hold the START/
PAUSE button again to restart the cycle.
IMPORTANT: If the lid is left open for more than 10 minutes,
the water will pump out and the F8E6 error code will appear
on the display.
12