Sata Configuration - Asus RS200-E9 Series User Manual

CState Pre-Wake [Enabled]
Allows you to enable or disable the CState Pre-Wake. Selecting [Disabled] will set bit 30 of
POWER_CTL MSR(0x1FC) to 1 to disable the CState Pre-Wake.
Configuration options: [Disabled] [Enabled]
Package C State limit [AUTO]
Allows you set the Package C State limit.
Configuration options: [C0/C1] [C2] [C3] C6] [C7] [C7s] [C8] [AUTO]
CFG lock [Enabled]
Allows you to configure MSR 0xE2[15], CFG lock bit.
Configuration options: [Disabled] [Enabled]
Intel TXT(LT) Support [Disabled]
Allows you to enable or disable the Intel(R) TXT(LT) support.
Configuration options: [Disabled] [Enabled]
5.4.5

SATA Configuration

SATA Controller(s) [Enabled]
Allows you to enable or disable the SATA Device.
Configuration options: [Enabled] [Disabled]
SATA Mode Selection [AHCI]
This allows you to choose how SATA controller(s) should operate.
Configuration options: [AHCI] [RAID]
ASUS RS200-E9 Series
5-33