Gigabyte GA-F2A78M-DASHV User Manual page 28

` Trusted Computing 2.0
& Security Device Support
Enables or disables Trusted Platform Module (TPM). (Default: Enable)
` GFX Configuration
& Primary Video Device
Specifies the first initiation of the monitor display from the installed PCI Express graphics card or the onboard
graphics.
IGD Video Sets the onboard graphics as the first display.
NB PCIe Slot Video Sets the PCI Express graphics card on the PCI Express slot controlled by the
North Bridge as the first display. (Default)
SB PCIe Slot Video Sets the PCI Express graphics card on the PCI Express slot controlled by the
South Bridge as the first display.
& Integrated Graphics
Enables or disables the onboard graphics function.
The BIOS will automatically enable or disable the onboard graphics depending on
Auto
the graphics card being installed. (Default)
Disables the onboard graphics.
Disabled
Always activates the onboard graphics, whether or not a PCI Express card is
Force
installed.
& UMA Frame Buffer Size
This item is configurable only when Integrated Graphics is set to Force. Frame buffer size is the total
amount of system memory allocated solely for the onboard graphics controller. MS-DOS, for example, will
use only this memory for display.
Options are: Auto (default), 32M, 64M, 128M, 256M, 512M, 1G, 2G.
` SATA Configuration
& OnChip SATA Channel
Enables or disables the integrated SATA controllers. (Default: Enabled)
& OnChip SATA Type (SATA3 0~SATA3 3 connectors)
Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers
to AHCI mode.
Native IDE Configures the SATA controller to IDE mode.
Enables RAID for the SATA controller.
RAID
Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
AHCI
(AHCI) is an interface specification that allows the storage driver to enable
advanced Serial ATA features such as Native Command Queuing and hot plug.
(Default)
& OnChip SATA Port4/5 Type (SATA3 4/SATA3 5 connectors)
This option is configurable only when OnChip SATA Type is set to RAID or AHCI. Configures the operating
mode of the integrated SATA3 4~SATA3 5 connectors.
As SATA Type The mode depends on the OnChip SATA Type settings. (Default)
Configures the SATA3 4~SATA3 5 connectors to PATA mode.
IDE
& PORT0 Hot Plug~PORT5 Hot Plug
Enables or disable the hot plug capability for each SATA port. (Default: Disabled)
& SATA Power on PORT0~SATA Power on PORT5
Enables or disables each SATA port. (Default: Enabled)
- 28 -