Sony F3112 User Manual page 47

Increasing Wi-Fi signal strength
There are a number of things you can do to improve Wi-Fi reception:
•
Move your device closer to the Wi-Fi access point.
•
Move the Wi-Fi access point away from any potential obstructions or interference.
•
Don't cover the Wi-Fi antenna area of your device (the highlighted area in the
illustration).
Wi-Fi® settings
When you are connected to a Wi-Fi network or when there are Wi-Fi networks
available in your vicinity, it is possible to view the status of these networks. You can
also enable your device to notify you whenever an open Wi-Fi network is detected.
If you are not connected to a Wi-Fi network, your device uses a mobile data
connection to access the Internet (if you have set up and enabled a mobile data
connection on your device). By adding a Wi-Fi sleep policy, you can specify when to
switch from Wi-Fi to mobile data.
To enable Wi-Fi network notifications
1
Turn on Wi-Fi, if it is not already on.
2
From your Home screen, tap
3 Find and tap Settings > Wi-Fi.
4 Tap > Advanced.
5
Drag the slider beside Network notification to the right.
To view detailed information about a connected Wi-Fi network
1
From the Home screen, tap
2 Find and tap Settings > Wi-Fi.
3
Tap the Wi-Fi network that you are currently connected to. Detailed network
information is displayed.
To add a Wi-Fi sleep policy
1 From the Home screen, tap
2
Find and tap Settings > Wi-Fi.
3 , then tap Keep Wi-Fi on during sleep.
Tap
4
Select an option.
To find the MAC address for your device
1
From the Home screen, tap
2
Find and tap Settings > Wi-Fi.
3 . The MAC address is displayed in the list.
Tap
This is an internet version of this publication. © Print only for private use.
.
.
.
.
47