Booting The First Time - Fujitsu Stylistic ST6010 User Manual

2
Press the Power On/Suspend/Resume button to start the system. After performing initialization, the system
starts the operating system installed on the hard disk drive. Once the operating system is running, you can use
the system.

Booting the First Time

We strongly recommend that you not attach any external devices until you have gone through the initial
power on sequence.
When you turn on your tablet for the first time, it will display a Fujitsu logo on the screen. If you do
nothing the system will load the operating system, and then the Windows Welcome will begin.
Depending upon your operating system (Windows Vista or XP edition), there is a different procedure for
stating your system for the first time, as outlined below.
Starting Windows Vista the first time
T
HE FIRST TIME YOU INITIALIZE YOUR
APPROXIMATELY TWO MINUTES
BOX WILL APPEAR
I
MPORTANT
BUTTONS
In order to ensure that you receive the most benefits from the Windows Vista operating system, it should
be registered the first time you use it.
1
First of all, you will need to read and accept the End User License Agreements (EULAs).
•
I
F YOU REJECT THE TERMS OF THE LICENSE AGREEMENTS YOU WILL BE ASKED TO REVIEW THE LICENSE
AGREEMENTS FOR INFORMATION ON RETURNING
•
Y
OU CANNOT USE YOUR TABLET UNTIL YOU HAVE ACCEPTED THE
PROCESS YOUR TABLET WILL RETURN TO THE BEGINNING OF THE
SHUT YOUR TABLET DOWN AND START IT UP AGAIN
. T
HIS IS NORMAL
.
: D
URING THE SETUP PROCEDURE
,
OR USE ANY PERIPHERAL DEVICES SUCH AS A MOUSE
50 - Starting the Tablet PC
W V ,
INDOWS ISTA SYSTEM THE SCREEN WILL BE BLANK FOR
. A
FTER INITIALIZATION
,
DO NOT DISCONNECT THE POWER SUPPLY
,
W
INDOWS OR TO SHUT DOWN YOUR
L
ICENSE
W
INDOWS
.
, "S U W
A ET P INDOWS
,
PRESS ANY
,
KEYBOARD OR REMOTE CONTROL
T PC.
ABLET
A . I
GREEMENTS F YOU STOP THE
W P ,
ELCOME ROCESS EVEN IF YOU
"
DIALOG
.