Safety ..................................3 National Conventions ............................3 Power ................................4 Installation ................................5 Cleaning................................6 Other .................................. 7 Setup ..................................8 Contents in Box ..............................8 Setup Base ................................ 9 Adjusting the monitor ............................10 Connecting the Monitor ............................ 11 Adaptive-Sync function ............................
Safety National Conventions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows: NOTE: A NOTE indicates important information that helps you make better use of your computer system.
Power The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature.
Installation Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product.
Cleaning Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet. When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface.
Other If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center. Make sure that the ventilating openings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vibration or high impact conditions during operation. Do not knock or drop the monitor during operation or transportation.
VGA Cable USB Cable Audio Cable Not all signal cables (HDMI / DP / VGA / USB /Audio cables), CD manual will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.
Setup Base Please setup or remove the base following the steps as below. Please place the monitor on a soft and flat surface to prevent the scratch. Setup: Remove:...
Adjusting the monitor For optimal viewing, it is recommended to look at the full face of the monitor, and then adjust the monitor's angle to your own preference. Hold the stand so you will not topple the monitor when you change the monitor's angle. NOTE: Do not touch the LCD screen when you change the angle.
Connecting the Monitor Cable Connections In Back of Monitor and Computer: HDMI 2 HDMI 1 Analog (D-Sub 15-Pin VGA cable) Earphone out Power To protect equipment, always turn off the PC and LCD monitor before connecting. Connect the power cable to the AC port on the back of the monitor. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer's D-Sub port.
Adaptive-Sync function Adaptive-Sync function is working with DP/HDMI1/HDMI2 Compatible Graphics Card: Recommend list is as the below, also could be checked by visiting www.AMD.com AMD Radeon™ RX 480 AMD Radeon™ RX 470 AMD Radeon™ RX 460 Radeon Pro Duo AMD Radeon R9 300 Series AMD Radeon R9 Fury X AMD Radeon R9 360 AMD Radeon R7 360...
Adjusting Hotkeys Source/Auto/Exit Game Mode/< Dial Point/> Menu/Enter Power Source/Auto/Exit When the OSD is closed, press “ ” button will be Source hot key function. When the OSD is closed, press “ ” button continuously about 2 seconds to do auto configure (Only for the models with D-Sub).
OSD Setting Basic and simple instruction on the control keys. Press the MENU-button to activate the OSD window. Press to navigate through the functions. Once the desired function is highlighted, press the to activate it. If there is a sub-menu, press to navigate through the sub-menu functions.
Luminance Contrast 0-100 Contrast from Digital-register. Brightness 0-100 Backlight Adjustment Standard Standard Mode Text Text Mode Internet Internet Mode Eco mode Game Game Mode Movie Movie Mode Sports Sports Mode Reading Reading Mode Gamma1 Adjust to Gamma 1 Gamma Gamma2 Adjust to Gamma 2 Gamma3 Adjust to Gamma 3...
Image Setup Clock 0-100 Adjust picture Clock to reduce Vertical-Line noise. Phase 0-100 Adjust Picture Phase to reduce Horizontal-Line noise. Sharpness 0-100 Adjust picture sharpness. H. Position 0-100 Adjust the horizontal position of the picture. V. Position 0-100 Adjust the vertical position of the picture.
Color Setup Warm Recall Warm Color Temperature from EEPROM. Normal Recall Normal Color Temperature from EEPROM. Color Temp. Cool Recall Cool Color Temperature from EEPROM. sRGB Recall SRGB Color Temperature from EEPROM. User Recall User Color Temperature from EEPROM Full Enhance ON/OFF Disable or Enable Full Enhance Mode.
Picture Boost Bright Frame ON/OFF Enable/Disable Bright Frame Frame Size 14-100 Adjust the Size of the Frame Brightness 0-100 Brightness Adjustment for Enhance Area Contrast 0-100 Contrast Adjustment for Enhance Area H. position 0-100 Adjust the horizontal position of the Frame V.
OSD Setup Language Select the OSD language. Timeout 5-120 Adjust the OSD timeout. please be noted that only DP1.2 support free sync 1.1/1.2 DP Capability function H. Position 0-100 Adjust the horizontal position of the OSD. V. Position 0-100 Adjust the vertical position of the OSD. Volume 0-100 Volume Adjustment.
If picture is too white to be saw the detail clearly, adjusting from 50 to0 for clear picture Low input Lag ON/OFF Turn off frame buffer to decrease input lag (24G2E/27G2E) Game Color will provide 0-20 level for adjusting Game Color 0-20 saturation to get better picture.
Adjust the maximum resolution and frequency that the monitor can handle properly. Make sure the AOC Monitor Drivers are installed. Adjust the Contrast and Brightness Controls. Press to auto adjust. Picture Is Fuzzy & Has Make sure you are not using an extension cable or switch box.
Page 25
The Computer Power Switch should be in the ON position. The Computer Video Card should be snugly fitted in its slot. Make sure the monitor's video cable is properly connected to the computer. Monitor Is Stuck In Active Inspect the monitor's video cable and make sure no pin is bent. Off-Mode"...
R, G, B Analog Interface & HDMI Interface & DP Interface Separate Sync. H/V TTL Horizontal scan range 30~160KHz Horizontal scan 527.04mm Size(Maximum) 48~144Hz (24G2E) Vertical scan range 48~75Hz (24G2E5) Vertical scan Size(Maximum) 296.46mm Optimal preset resolution 1920x1080@60Hz 1920x1080@60Hz(D-SUB) Others 1920x1080@144Hz(HDMI、DP) (24G2E)
Page 27
Model name 27G2E/27G2E5 Driving system TFT Color LCD Viewable Image Size 68.6 cm diagonal Panel Pixel pitch 0.3114(H)mm x 0.3114(V)mm Video R, G, B Analog Interface & HDMI Interface & DP Interface Separate Sync. H/V TTL Horizontal scan range 30~160KHz Horizontal scan 597.888mm Size(Maximum)
63.981 60.02 SXGA 1280x1024@75Hz 79.975 75.025 1280x720@50HZ 37.071 49.827 1280x720@60HZ 1280x1080@60Hz 67.173 59.976 Full HD 1920x1080@60Hz 67.5 Full HD 1920x1080@100Hz 113.21 99.93 (24G2E/27G2E) Full HD 1920x1080@120Hz 137.26 119.982 (24G2E/27G2E) Full HD 1920×1080@144Hz 158.1 (24G2E/27G2E) Full HD 1920×1080@75Hz 83.909 74.986 (24G2E5/27G2E5)
Pin Assignments 15-Pin Color Display Signal Cable Pin No. Signal Name Pin No. Signal Name Video-Red Video-Green Ground Video-Blue N.C. N.C. DDC-Serial data Detect Cable H-sync GND-R V-sync GND-G DDC-Serial clock GND-B 19-Pin Color Display Signal Cable Pin No. Signal Name Pin No.
Page 30
20-Pin Color Display Signal Cable Pin No. Signal Name Pin No. Signal Name ML Lane 3(n) ML Lane 0(p) ML Lane 3(p) CONFIG1 ML Lane 2(n) CONFIG2 AUX CH(p) ML Lane 2(p) ML Lane 1(n) AUX CH(n) Hot Plug Detect ML Lane 1(p) Return OP PWR DP PWR...
Plug and Play Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities.