LG ProBeam UST HF85JA Owner's Manual page 128

80
PJT Mode
(Q. Settings)
This function turns the projected image upside down or flips horizontal.
Edge Adjustment (4 Corner Keystone)
(Q. Settings)
Edge Adjustment
(4 Corner Keystone) adjusts the horizontal and vertical sides
of the projected image if the projector is at an angle and not perpendicular to the
screen. This feature ensures the shape of the projected image is not distorted.
Use this feature only when the projector cannot be set up at the optimal angle.
Edge Adjustment may result in a loss of image quality.
•
The value range of
Top Left (H: 0 to 100, V: 0 to 100)
-
Top Right
(H: -100 to 0, V: 0 to 100)
-
Bottom Left (H: 0 to 100, V: -100 to 0)
-
Bottom Right
-
Auto Keystone
(Q. Settings)
Auto Keystone provides a rectangular screen image by automatically adjusting the
keystone number when there is a trapezoidal screen image caused by tilting of the
projector.
• On
Automatically adjusts the keystone number.
•
Off
Manually adjusts the keystone number.
Auto Power
(Q. Settings)
Makes the projector turn on automatically when the power code is connected to
the projector.
•
On
When the power code is connected to the projector, it turns on automatically.
• Off
When the power code is connected to the projector, it goes into standby mode.
General PJT Mode
General Edge Adjustment
Edge Adjustment is as follows.
(H: -100 to 0, V:-100 to 0)
General Auto Keystone
General Auto Power