Adjusting The Audio Settings - Vizio M551d-A2 User Manual

ADJUSTING THE AUDIO SETTINGS

To adjust the audio settings:
1. Press the MENU button on the
remote. The on-screen menu
is displayed.
2. Use the Arrow buttons on the
remote to highlight Audio and
press OK. The AUDIO menu
is displayed.
3. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press Left/Right
Arrow buttons to change
the setting:
• TV Speakers - Turns the
built-in speakers on or off.
When an external audio device (such as a VIZIO sound
bar) is set up, TV Speakers is automatically set to Off
and Volume Control to External.
To use the TV speakers, set TV Speakers to On and
Volume Control to TV.
When the TV speakers are set to On, DTS signals
cannot be passed through digital audio outputs.
• Surround Sound - Surround sound uses DTS TruSurround
to deliver an immersive surround sound experience
from the TV's internal speakers. TruSurround completes
the entertainment experience by providing deep, rich
bass and by delivering crisp details and clear, intelligible
dialog. Select On or Off.
• Volume Leveling - Volume leveling uses DTS TruVolume
to maintain consistent volume levels during transitions
VIZIO
AUDIO
TV Speakers On
Surround Sound On
Volume Leveling On
-
+
Balance 0
-
+
Lip Sync 0
Volume Control TV
Digital Audio Out PCM
Analog Audio Out Fixed
Equalizer Settings
Delete Audio Mode
Audio Device Setup
™
™
30
between program content, AV formats, and input sources.
Select On or Off. In a few cases, volume leveling may
artificially suppress volume increases, making it difficult
to hear dialog or flattening sudden noises. If this occurs,
turn volume leveling off.
• Balance - Adjusts the loudness of the audio output from
the left and right speakers.
Wide Zoom Normal Panoramic
• Lip Sync - Adjusts the synchronization between the
display image and the accompanying audio track.
• Volume Control - Sets the VIZIO TV remote to control
Exit 2D 3D
either the volume level of the TV or an external audio
device. Select TV or External.
• Digital Audio Out - Changes the type of processing for
ABC
digital audio out and HDMI ARC output when connected
to a home theater audio system. Select PCM or Bitstream.
Input Wide CC
You must select Bitstream for audio with more than
two channels (3.0, 5.0, or 5.1, for example).
Sleep
Picture Audio
Timer
• Analog Audio Out - Sets the volume control properties for
the RCA connector when connected to a home theater
audio system. Select Variable if you are controlling the
Network Settings Help
volume with the TV's volume controls, or select Fixed if
an external audio device (sound bar or AV receiver) will
control the volume.
• Equalizer Settings - Adjusts the boost or attenuation of
different frequencies using either preset or custom settings.
See Changing the Equalizer Settings on page 32.
• Delete Audio Mode - Deletes a custom audio mode
created using the Equalizer Settings. See Deleting the
Custom Audio Mode on page 33.
• Audio Device Setup - Set up an audio device so that
the TV remote can be used to change the volume. See
Setting up an Audio Device on page 31.
4. When you have finished adjusting the audio settings, press
the EXIT button on the remote.
5