Nikon VQA091AA Reference Manual page 190

6
Press and hold (for at least 3 seconds) the power button on the
remote control.
Pairing starts for the camera and remote control. During the process, the status
lamp on the remote control flashes about every 0.5 seconds.
When pairing is complete, a connection is
established between the camera and the remote
control. When you enter shooting mode, M is
displayed on the shooting screen.
If a pairing failure message is displayed, perform
the procedure again from step 5.
Switching the Connection to a Smart Device
Switch Choose connection (A130) in the network menu from Remote control
to Smart device.
Paired smart devices are connected to the camera through Bluetooth when the
SnapBridge app is launched. L is displayed on the shooting screen of the camera.
For connections with smart devices, see the included "SnapBridge Connection
Guide" and SnapBridge online help.
Technical Notes
Accessories
176
2 5 m 0 s 2 5 m 0 s
5 0 0 5 0 0