Panasonic PT-TX340 Operating Instructions Manual page 23

12
Top
Projection direction
12 Control panel and Indicators
13 Lamp cover (x page 96)
The lamp unit is located inside.
rControl panel and Indicators
1 Power indicator <ON(G)/STANDBY(R)>
Displays the status of the power.
2 Power <v/b> button (v standby / b power on)
Sets the projector to the state where the projector is
switched off (standby mode). Also starts projection when
the power is switched off (standby mode).
3 asqw buttons
Used to select the menu items in the menu operation.
<MENU> / q button
4
Displays or hides the main menu. (x page 46)
When the sub menu is displayed, pressing it will return to
the previous screen.
Note
f The <INPUT/ENTER> button on the control panel is functioned as the <ENTER> button when the menu screen is displayed.
The operating procedure of menu screen is described as "Press the <ENTER> button" in this manual in order to unify the
control panel operation with the remote control operation.
Chapter 1 Preparation - About your projector
13
14
1
2
3
4
Bottom
1
14 Focus ring
Adjust the focus.
5
6
7
5 Warning indicator <WARNING>
Indicates the abnormal conditions of the projector.
6 <KEYSTONE> button
Corrects the distortion of the projected image.
(x page 41)
7 <INPUT/ENTER> / w button
Displays the input source menu. (x pages 37)
Determines or executes an item in the menu screen.
8
1
ENGLISH - 23