Table of Contents
Advertisement
Adjust using this cursor
3
You can adjust the deflection of the
side, using V/v/B/b.
You can adjust the center point of
deflection using V/v. For the range of
deflection, use B/b. You can adjust the
left/right side independently.
Press the RESET key to restore the
projected image before adjustment.
Correcting deflection 2 – top/bottom
sides of the image
1
Move x using V/v/B/b to select the
side you want to correct.
2
Press the ENTER key.
The cursor appears.
18
Projecting an Image
Adjust using this cursor
3
You can adjust the deflection of the
side, using V/v/B/b.
You can adjust the center point of
deflection using B/b. For the range of
deflection, use V/v. You can adjust the
top/bottom independently.
Press the RESET key to restore the
projected image before adjustment.
Setting the blending function to
project from multiple projectors
1
Install the projectors.
Input a pattern, etc., to adjust the
projected positions from multiple
projectors.
Set a different ID mode for each
projector (page 28).
Advertisement
Table of Contents
