Sony MHC-M20D Operating Instructions Manual page 57

Hide thumbs Also See for MHC-M20D:
Table of Contents

Advertisement

(Except for Latin American,
• •
European, and Russian models)
Set the color system to match your
TV (page 20, 30).
The aspect ratio of the TV screen
cannot be changed.
The aspect ratio is fixed on your
• •
DVD VIDEO and video file.
Depending on the TV, you may not
• •
change the aspect ratio.
The language for the sound track
cannot be changed.
Multilingual tracks are not
• •
recorded on the DVD VIDEO being
played back.
The DVD VIDEO prohibits changing
• •
the language for the sound track.
The subtitles language cannot be
changed.
Multilingual subtitles are not
• •
recorded on the DVD VIDEO being
played back.
The DVD VIDEO prohibits changing
• •
the subtitles.
The subtitles cannot be turned off.
The DVD VIDEO prohibits turning
• •
off subtitles.
The camera angles cannot be
changed.
Multi-angles are not recorded on
• •
the DVD VIDEO being played back.
The DVD VIDEO prohibits changing
• •
the angles.
Tuner*
There is severe hum or noise, or
stations cannot be received.
Connect the antenna properly.
• •
Change antenna location and
• •
its orientation to obtain good
reception.
Turn off nearby electrical
• •
equipment.
* Radio may not be received depending
on the radio wave conditions or the
housing environment in your area.
BLUETOOTH device
Pairing cannot be performed.
Move the BLUETOOTH device
• •
closer to the system.
Pairing may not be possible if
• •
other BLUETOOTH devices are
present around the system.
In this case, turn off the other
BLUETOOTH devices.
Make sure to enter the correct
• •
passkey when selecting the
system's name (this system) on
the BLUETOOTH device.
The BLUETOOTH device cannot
detect the system, or "BT OFF"
appears on the display.
Set the BLUETOOTH signal to "BT
• •
ON" (page 40).
Connection is not possible.
The BLUETOOTH device you
• •
attempted to connect does not
support the A2DP profile, and
cannot be connected with the
system.
Enable the BLUETOOTH function of
• •
the BLUETOOTH device.
Establish a connection from the
• •
BLUETOOTH device.
The pairing registration
• •
information has been erased.
Perform the pairing operation
again.
The sound skips or fluctuates, or
the connection is lost.
The system and the BLUETOOTH
• •
device are too far apart.
If there are obstacles between
• •
the system and your BLUETOOTH
device, remove or avoid the
obstacles.
57
GB

Advertisement

Table of Contents
loading

Table of Contents