ZyXEL Communications VMG Series User Manual page 71

Table 16 IP Settings in this Tutorial
DEVICE / COMPUTER
A
R's N1
R's N2
B
To configure a static route to route traffic from N1 to N2:
Log into the Zyxel Device's Web Configurator in advanced mode.
1
Click Network Setting > Routing.
2
Click Add new Static Route in the Static Route screen.
3
Configure the Static Route Setup screen using the following settings:
4
Click the Active button to enable this static route. When the switch turns blue (
4a
enabled. Enter the Route Name as R.
Set IP Type to IPv4.
4b
Type the Destination IP Address 192.168.10.0 and IP Subnet Mask 255.255.255.0 for the destination,
4c
N2.
Click the Use Gateway IP Address button to enable this function. When the switch turns blue
4d
( ), the function is enabled. Type 192.168.1.253 (R's N1 address) in the Gateway IP Address field.
Select VDSL as the Use Interface.
4e
Chapter 4 Tutorials
IP ADDRESS
192.168.1.34
192.168.1.253
192.168.10.2
192.168.10.33
VMG/XMG Series User's Guide
71
), the function is