Rotating Bezel - Seiko PROSPEX SNE567 Instructions Manual

● models with day and date
● Before setting the day and date, be sure to set the main time.
Day
Date
Day
Date
1. It is necessary to adjust the date at the end of February and 30-day months.
2. Do not set the date between 9:00 p.m. and 1:00 a.m. Otherwise, the date may not change
properly.
14
CROWN
Unscrew and pull out to first click.
Turn clockwise to set the day of the
week.
Turn counterclockwise to set the date.
Push back into normal position.
Screw all the way in until it is locked.

ROTATING BEZEl

The rotating bezel can show the elapsed time up to 60 minutes. By setting it before
diving, you can know how many minutes you are underwater.
● To prevent accidental rotation, the rotating bezel is so designed that rotation
becomes harder in water. Also for safty's sake, it rotates only counterclockwise,
so that the time measured is never shorter than the actual elapsed time.
1. Turn the rotating bezel to align its "
* The rotating bezel rotates with clicks. With each click, it turns half a minute.
2. To know the elapsed time, read the number on the rotating bezel that the
minute hand points to.
Example:
Minute hand
"30" on rotating bezel
Bezel rotation may become slightly stiffer underwater. This is not a malfunction.
" mark with the minute hand.
Start(10:10 AM)
" " mark
30 minutes have elapsed.
15