Cross Stitch; Fagoting; French Knots - Janome MOD-100 Instruction Book

Table of Contents

Advertisement

q
w
e
4
w
q
4
q
w
e
e
q
w

Cross Stitch

q Stitch Pattern:
w Thread tension dial: 3 to 6
e Presser foot:
You can make cross stitch designs with these patterns, in
half the time it would take if embroidered by hand.
Use a plain close woven fabric such as linen or wool
flannel. If you use light weight fabric, apply a tear away
backing for support.
Sew from the center of the design outward.
q
If you press the auto-lock button before sewing, the
machine will sew one unit of the cross stitch and stop
automatically.
q Auto-lock button

Fagoting

q Stitch pattern:
w Thread tension dial: 3 to 6
e Presser foot:
* The stitch patterns 14, 42, 43 and 62 can also be used.
Use these stitches to join two pieces of fabric to create
an open work appearance and add design interest.
Fold under each fabric edge 1.5 cm (5/8˝) and press.
Pin the two edges to paper or tear backing 0.3–0.4 cm
(1/8˝) apart.
Sew slowly, guiding the fabric so the needle catches the
folded edge on each side.
After sewing is finished, tear away the paper.
q 0.3–0.4 cm (1/8˝)
w Paper

French Knots

q Stitch pattern:
w Thread tension dial: 5 to 8
e Presser foot:
Tighten the thread tension to 5-8 when sewing.
47
49
Satin stitch foot F
46
Satin stitch foot F
54
Satin stitch foot F

Advertisement

Table of Contents
loading

Table of Contents